Home/ Low boiling hydrocarbon solvents/ Isohexane

Isohexane supplier Europe

Isohexane supplier in Europe
for buyers who need price, spec, SDS and realistic route answers.

Alcoris handles isohexane enquiries for industrial buyers across Europe. This page is built for real purchasing work: current specification, SDS requests, bulk or packaged supply discussions, destination review and commercially grounded feasibility. Isohexane is usually selected when evaporation speed and purity matter more than handling comfort.

Commercial reality for isohexane: this is not a general-purpose solvent. Serious buyers usually want to validate four points early: whether the volatility profile actually fits the application, whether the site and route can handle a highly flammable liquid, whether the current documentation supports approval, and whether bulk, IBC or drums are commercially practical for the destination and volume.
Very light hydrocarbon solvent usually reviewed for adhesives, specialist cleaning, coatings and polymer processing.
Current specification and SDS available during the quotation process, subject to actual supply route and producer documentation.
Typical profile: boiling range around 56–62 °C, flash point around -36 °C, aromatic content ≤0.001 wt% and sulfur typically ≤1 mg/kg.
Europe-focused B2B handling with route feasibility, packaging logic and destination practicality reviewed before quoting.
Send an enquiry Is isohexane the right grade?

Comparing isohexane with hexane, heptane or another fast-evaporating hydrocarbon? See the flash point vs boiling range guide and the product specifications page.

Very light hydrocarbon solvent
Flash point around -36 °C
Typical aromatics ≤0.001 wt%
Fast evaporation profile
Bulk · IBC · drums

Quick decision check

When isohexane is usually the right choice and when it is not

Isohexane sits at the very light end of the hydrocarbon solvent range. Buyers usually review it when they want very fast evaporation, ultra-low aromatics and low residue potential. This is not a general-purpose solvent. It is a specialist choice.

01
Choose isohexane when
You need a very light hydrocarbon solvent for adhesives, specialist cleaning, selected coatings or polymer processing where speed of evaporation and purity matter most.
02
Think twice when
Your site, storage setup or route is not comfortable with a highly flammable liquid profile and a flash point around -36 °C.
03
Review alternatives when
You actually need a slower drying solvent, easier handling comfort or a route that is less demanding from a transport and operational standpoint.
04
Always verify
Final fit depends on intended use, current documentation, route practicality, packaging and the real specification being quoted, not on the product name alone.

Grade context

Isohexane vs hexane vs heptane in practical buying terms

This is not a producer specification table. It is a purchasing-level comparison to help frame whether isohexane is commercially and technically worth discussing for your requirement.

Decision point
Isohexane
Hexane
Heptane
Typical buying logic
Very light and high purityUsually reviewed where ultra-low aromatics, very low sulfur and fast evaporation are part of the requirement.
Classic C6 reference pointUsually reviewed when buyers want a familiar light hydrocarbon route, sometimes with a different regulatory or composition logic.
Heavier and less volatileUsually considered when the process needs a slower, less volatile light solvent route.
Boiling direction
Around 56–62 °C typical.
Usually light C6 range, depending on grade.
Higher boiling than isohexane.
Flammability profile
Very high. Flash point around -36 °C typical.
High. Often reviewed for similar light-solvent handling concerns.
Still flammable, but commercially easier in some comparisons.
Typical buyer question
"Can our site and route handle this volatility?"
"Do we need this exact C6 profile or just a light solvent?"
"Would a slightly heavier route be easier without losing performance?"

For broader buyer context, review the flash point vs boiling range guide.

Applications

Where isohexane is commonly discussed in industrial use

The right answer always depends on process, approvals and route practicality, but these are the discussions where isohexane most often comes up.

Adhesives
Fast evaporating solvent systems
Reviewed where buyers need a very light hydrocarbon solvent with fast evaporation, low residue and high purity consistency.
Cleaning
Specialist industrial cleaning
Considered where a very light hydrocarbon route is needed and the site understands the volatility and flammability profile that comes with it.
Coatings
Light hydrocarbon coating discussions
Relevant in selected coatings and related systems where a fast, clean hydrocarbon cut is commercially preferred.
Polymer processing
Reaction diluent and process use
Often reviewed where buyers want very low sulfur, ultra-low aromatics and controlled light-boiling behaviour in process conditions.

Typical profile

What buyers usually expect from an isohexane profile before asking for the actual spec

The content below is intentionally descriptive rather than copied as a website specification. It tells a buyer what sort of profile isohexane usually represents, while keeping the real decision anchored to current documentation.

  • ◆
    Ultra-low aromatic content. Typical product data shows aromatic content at ≤0.001 wt%, which is one of the reasons buyers review isohexane for clean specialist applications.
  • ◆
    Very light boiling range. Typical product data shows a distillation window around 56–62 °C, making this a fast-evaporating hydrocarbon solvent.
  • ◆
    Very high flammability. Typical product data and the SDS point to a flash point around -36 °C and a highly flammable liquid classification.
  • ◆
    Low residue / low sulfur logic. Typical product data shows sulfur at ≤1 mg/kg and low non-volatile behaviour, which matters in sensitive process and equipment discussions.
  • ◆
    n-Hexane remains relevant. Typical product data shows n-hexane around 3.8 wt% and the SDS identifies the substance as hydrocarbons, C6, isoalkanes, <5% n-hexane, so toxicology and OEL discussions should not be ignored.
What this means in practice:

- extremely fast evaporation compared to mid-range hydrocarbon solvents
- minimal residue due to low non-volatile content
- very high flammability requiring careful handling and route validation
- suitability limited by site safety, not just by formulation needs

In other words: isohexane is usually selected for performance, but only where the operating environment can support it.

Regulatory position

What buyers should not assume about isohexane

This is one of the most important points on the page because the wrong assumption can waste days of approval work.

  • ◆
    Do not assume food-contact support. The supplied European regulatory summary states that this product is not supported for use in food contact applications.
  • ◆
    Do not assume pharma or medical support. The same regulatory summary does not support pharmaceutical or medical applications requiring pharmacopoeia compliance.
  • ◆
    Do not assume every light hydrocarbon route is interchangeable. Current documentation and route-specific data still decide whether the enquiry is workable.
Practical effect: good isohexane enquiries move faster when the buyer is explicit about the intended use and the required documentation path from the start.

Supply logic

Bulk, IBC or drums what usually makes sense for isohexane

Because isohexane is a very light and highly flammable solvent, packaging format is not a cosmetic detail. It affects route feasibility, storage, unloading and commercial practicality.

Bulk tanker
Usually the most economical route for larger industrial demand where the site is already equipped for light flammable solvent handling and unloading.
IBC supply
Can make sense for more flexible demand or qualification work, subject to route practicality and packaging availability at the time of enquiry.
Drums
Discussed for smaller requirements or where site logistics make IBC or bulk less practical, but always reviewed against transport and handling reality.

Commercial fit

Why buyers use this page instead of guessing

A serious isohexane enquiry is usually driven by one of these situations.

Pricing
You need a real market reference
Not a generic web listing. You want current commercial logic for your packaging, route and destination.
Documentation
You need the current spec and SDS before approval
Light specialist solvents often stop at the documentation stage. A useful enquiry should show whether the current route paperwork fits your internal review.
Volatility
You need a very light solvent and know the trade-off
The real question is often not just purity. It is whether this volatility and flammability profile is workable for your site and process.
Substitution
You are reviewing isohexane against another light solvent
Sometimes the requirement is not fixed yet. You may still be comparing against hexane, heptane or another low-boiling hydrocarbon route.
Packaging
You need the right format answer
Bulk, IBC and drums are not interchangeable from a commercial or safety standpoint. The route should be reviewed before quoting.
Execution
You want a grounded commercial answer
A useful response tells you what is workable now, not what sounds good on a brochure.

Before you enquire

What usually speeds up an isohexane quotation

  • ◆
    State the intended use clearly. With isohexane, volatility, residue expectations and regulatory position matter more than with many heavier hydrocarbon solvents.
  • ◆
    Say whether you mainly need price, spec, SDS or all three. The fastest enquiries make this clear from the start.
  • ◆
    Include destination and packaging preference. Route practicality can differ materially for bulk, IBC and drums.
  • ◆
    Mention whether you are comparing with hexane or heptane. That often changes what the most useful first answer looks like.
  • ◆
    Do not assume food-contact support. The supplied European regulatory summary explicitly states that this product is not supported for food contact applications.
Useful adjacent reading: review the flash point vs boiling range guide if you are still selecting the right light solvent, and the product specifications page for how Alcoris handles documentation-driven enquiries.

FAQ

Questions buyers ask before sending an isohexane enquiry

What is isohexane usually used for?
Most isohexane enquiries relate to adhesives, specialist cleaning, coatings and polymer processing where buyers want a very light hydrocarbon solvent with fast evaporation and ultra-low aromatics.
Is isohexane the same from every supplier?
No. Isohexane refers to a recognizable light hydrocarbon grade band, but exact purity profile, n-hexane content, distillation behaviour and documentation can vary by source and supply route.
Can isohexane be supplied in bulk, IBC and drums?
Yes, depending on route, volume and current supply position. Bulk is usually the most logical for larger recurring demand, while IBC and drums can be discussed where route practicality supports them.
Do you provide SDS and current specification?
Yes. Current specification and SDS can be shared during the quotation process, subject to the actual supply route and available producer documentation.
Is isohexane supported for food contact applications?
No. The supplied European product regulatory summary states that this product is not supported for use in food contact applications.
Is isohexane dangerous goods transport?
Yes. According to the supplied SDS, isohexane is transported as UN1208 Hexanes, class 3, packing group II for ADR/RID, IMDG and IATA. Route and packaging should therefore be reviewed commercially and operationally.

Send an enquiry

Isohexane enquiry
built for serious buyers of very light hydrocarbon solvents.

Give the basics and the response can be useful: destination, volume, packaging preference, use case and whether you mainly need pricing, specification, SDS, or all of the above.

◆Include destination and approximate volume for a more realistic first answer.
◆Mention whether you are comparing isohexane with hexane, heptane or another light solvent, not just buying it as-is.
◆Say whether you need pricing, specification, SDS, packaging review, or all of the above.
◆Spot and recurring requirements can both be discussed.

All offers are subject to unsold and subject to final confirmation. Specification, packaging format, availability, timing and pricing are always confirmed at quotation stage based on the current supply route and market situation. Final suitability and regulatory compliance remain the responsibility of the buyer.

Useful enquiries usually include: delivery country, rough volume, preferred packaging, intended use, and whether you mainly need pricing, documentation or both.

Response same day during EU working hours.

Thank you. Your enquiry has been sent.
Alcoris will review the request and reply by email.
Something went wrong while sending the enquiry. Please try again or email directly via enquiries@alcoris.eu.

No obligation, purely commercial and technical validation.
Contact details are used solely to respond to this enquiry.

Send an enquiry